Remodeling FAQs For Atlanta Homes
Frequently Asked Questions
The right plan prevents surprises. Below are the questions we hear most about kitchens, bathrooms, basements, and outdoor spaces. Plus city-specific tips for Alpharetta, Cumming, Johns Creek, Milton, and Dawsonville. If you don’t see your question, ask us! We’ll add it here.
General FAQs
-
Typical ranges after design & ordering:
Bathrooms: 3–6+ weeks
Kitchens: 6–10+ weeks
Basements: 6–12+ weeks
Outdoor: 3–8+ weeks
Lead times, inspections, and scope drive the schedule. We’ll clearly communicate milestones before you sign.
-
Consultation & Budget Range
Design & 3D Plan
Fixed Proposal & Schedule
Build with Weekly Update
Final Walkthrough & Warranty. You’ll always know what’s happening next.
-
The first step is to schedule a personal design consultation. From there, we’ll learn more about your space, your goals, and your style — and begin shaping a custom design plan made just for you.
-
We start by evaluating your current layout to identify opportunities for better flow, storage, and space utilization. From there, we create a tailored plan that includes furniture selection, decor curation, and layout enhancements for kitchens, closets, vanities, and more.
-
Yes, we specialise in full home design — bringing harmony, sophistication, and functionality to every room. From layout planning to selecting finishes, furniture, and accessories, we ensure a cohesive look that reflects your lifestyle and taste.
-
Yes. We work with a trusted network of artisans and suppliers to source or create custom pieces that perfectly fit your space and reflect your design vision — from built-in bookshelves to one-of-a-kind vanities.
-
Usually yes. We set dust barriers, protect floors, and coordinate short utility tie-ins. If you have only one full bath, we’ll sequence work to minimize downtime.
-
Yes. We manage permits and inspections with your local authority (city/county), and we’ll prepare HOA/ARC packages when required.
-
We start with a range during consultation, then lock scope and pricing after design and selections. No vague allowances, we itemize what’s included and what’s optional.
-
Yes, se habla Español. We can meet and review plans in English or Spanish.
-
We check lead times before finalizing your schedule. If anything slips, we present equivalent alternatives (with pros/cons) or resequence tasks to protect your finish date.
-
Temporary walls, zipper doors, floor protection, negative-pressure fans where needed, daily cleanup, and no-smell/low-VOC products when possible.
-
Workmanship is covered; product warranties remain with the manufacturer. Your proposal will list both.
Kitchen Remodeling FAQs
-
We size the hood to appliance output and duct to the exterior. When needed, we add make-up air so doors don’t slam and pilots don’t backdraft.
-
Induction is fast, efficient, and easier to vent; gas has great control but needs careful clearances and ventilation. We’ll spec the kitchen around your choice.
-
Drawer banks, tray dividers, pull-outs, trash/recycle pullers, spice and utensil inserts, and tall pantry walls where space allows.
Bathroom Remodeling FAQs
-
Membrane + preslope + pan or integrated system + flood test before tile. Fans are sized to the room and ducted outside (not into the attic).
-
Yes, Curbless requires slope and often subfloor modification. Radiant heat adds comfort and dries floors faster.
-
Adequate ventilation to exterior, vapor management, and grout/sealant details. We’ll specify easy-clean materials for busy homes.
Basement Remodeling FAQs
-
Start with moisture strategy (vapor barriers, drainage), then HVAC supply/return sizing, insulation (especially rim joists), and sound control where it matters.
-
Yes, legal bedrooms need compliant egress. We’ll confirm locations and sizes early.
-
Typically yes. We verify rough-ins or add a pump if needed, then plan waterproofing, ventilation, and finishes.
Outdoor Remodeling FAQs (Decks, Patios, Kitchens)
-
Yes, if we specify non-combustible backers, correct heat clearances, and ventilation. Gas/electric are planned with shutoffs and GFCI/AFCI where required.
-
Composites/PVC resist rot and fading; hardwoods are beautiful but need maintenance. We’ll weigh heat retention, color, budget, and traction.
-
Footings and connections are sized to loads and exposure; ledgers are properly flashed; roof ties and gutters are detailed to move water away.
City-Specific FAQs
Alpharetta
-
Yes. We prepare drawings/specs and coordinate approvals in neighborhoods like Windward, Avalon area, Webb Bridge, and North Point.
-
Electrical updates, venting, and layout tweaks are common. 3D planning helps confirm clearances before ordering.
-
Balance supply/returns and add sound control for media or office spaces.
Cumming (South Forsyth)
-
Higher humidity is present so we plan for dehumidification, exterior-ducted fans, and lake-tough finishes outdoors.
-
Forsyth County may require a septic capacity review when bedroom count changes or a full bath is added.
-
Egress, moisture strategy, and HVAC balancing make it feel like the main floor.
Johns Creek
-
Expect quiet hours, elevator reservations, and delivery windows. We coordinate property-management rules.
-
We’re used to St Ives and CCOS ARC processes; we stage discreetly and keep a clean site.
-
Yes, with clearances and venting verified before ordering.
Milton
-
Utility trench runs, drainage on slopes, and septic capacity checks if adding beds/baths.
-
ARC submittals and quiet hours; we coordinate inspections and delivery timing.
-
We design for uplift resistance, flashing, and dark-sky-friendly lighting on request.
Marietta
-
Yes, depending on your address and scope, we coordinate with the City of Marietta and/or Cobb County.
-
Often times these older homes require electrical updates, ventilation improvements, and layout corrections. We plan these early with 3D design so you don’t get surprised mid-build.
-
Yes, many Marietta projects are in East Cobb. HOA/ARC processes are common, especially for exterior work.
Sandy Springs
-
Yes, HOA/ARC requirements are common. We prepare drawings/specs and coordinate approvals when needed.
-
Yes, we coordinate with the City of Sandy Springs / Fulton County where required.
-
Clearances, non-combustible detailing, and safe utility routing.
Roswell
-
Older homes can require extra planning for electrical capacity, ventilation, plumbing updates, and structural adjustments. We confirm feasibility early and build a plan that respects the home’s character.
-
Yes. We coordinate permits and inspections with the City of Roswell (and applicable requirements depending on scope).
-
Yes. HOA/ARC requirements are common. We prepare drawings/specs and coordinate approvals when needed.
Dawsonville
-
Humidity, sun exposure, slopes, and drainage. We spec materials for lakeside weather and stabilize footings on grades.
-
Bedroom/bath additions may require capacity review with Dawson County; we always verify early.
-
Moisture plan first, then egress and HVAC balancing; many become guest suites or media rooms.
What To Prepare Before We Meet
Goals & must-haves (function first; finishes second)
Photos or a quick video of the current space
Approx. measurements or a floor sketch (phone photos are fine)
Inspiration (screenshots/links)
Constraints (timeline, pets/kids routines, HOA rules)
Preferred brands (appliances/fixtures)
Ready to Plan Your Project?
Tell us your goals, preferred timeline, and must-have features. We’ll typically respond within one business day.